Ссылка на проекты , которые пробовал:
https://github.com/amitesh-singh/FASTUSBasp (на данный момент эта прошивка залита )
http://we.easyelectronics.ru/teplofizik ... overy.html (по ссылке есть комментарий со ссылкой на проект под STM32F103)
Вычитал что нужно сделать следующее:
Но непонятно как сделать в Вашем проекте такое...in case of using a clone (for instance having "Van Ooijen's technische informatica" as vendor id instead of the original name "www.fischl.de"), make sure to use the -c usbasp-clone -P usb AVRDUDE settings instead of -c usbap -P usb. The clone setting causes AVRDUDE to ignore the vendor description and also accept the clone. You'd think having the correct VID, PID combination would be sufficient but no...
Помогите пожалуйста решить эту проблему:
С уважением Артем Угримов!Cформированная командная строка:
avrdude.exe -p t85 -c usbasp -P usb -U flash:r:"D:\mysaitend\PROJECTS\usb2in1\HEX\USBasp.hex":i
avrdude.exe: error: could not find USB device with vid=0x16c0 pid=0x5dc vendor='www.fischl.de' product='USBasp'
avrdude.exe done. Thank you.
Кстати программатор определяется нормально в диспетчере отличия только в Вендере .